effacer mmsi sur vhf Cobra HH600

Bonjour,
Retour au SAV.
support.cobra.com[...]number-

Si on a envie de changer souvent de bateau, le mieux est d'investir dans les VHF Navicom où la procédure est dans la documentation.

Cobra fourni des explications pour quelques VHF

support.cobra.com[...]-radio-

How to reset a Cobra handheld marine radio.
Modified on: Mon, 3 Apr, 2023 at 12:06 PM

If your handheld radio is not operating properly, the following describes how to reset the radio to factory settings.
MR HH90, MR HH100, MR HH200
Hold both the MODE button and the WX/UIC button, then power on. Continue holding the buttons until the display test is done.

MR HH125, MR HH150
Hold both the DW button and the MEM/ESC button, then power on. Continue holding the buttons until the display test is done. The display should show “IN”. Power off & back on.

MR HH300, MR HH400
Hold both the WX/UIC button and the HI/LO button, then power on. Continue holding the buttons for a few seconds, then release.

MR HH325, MR HH330, MR HH350, MR HH425, MR HH450, MR HH475, MR HH500
Hold both the H-M-L button and the Tri-Watch button, then power on. Continue holding the buttons until the display test is done.

MRHH600
Power OFF the MRHH600. Press and Hold the Rewind, Channel Down and Left most function (below the LCD – first button going left to right) buttons and turn the radio on. From the FACTORY MODE screen, select “FACTORY RESET” and follow the prompts.